Alu Bender

Edge processing

Alu Benderは、建築ファサード・輸送産業・インテリアデザイン・内装建材などのパネルにおける直線エッジを加工する多目的自動フライス/ベンディングマシンです。これまで手加工で行っていた化粧小口処理を機械化し、現場の省力化・短納期化に大きく貢献します。

主な特徴

唯一無二のソリューション
連続エッジ加工
ACMマルチエッジヘミング曲げ：つぶし曲げ
アルミハニカム素材の切削と曲げ加工
ファイバーセメントとHPLパネルのエッジ加工

Alu Bender
アルベンダーの主な特徴

ACM / ACP, PE CORE, MINERAL CORE (建築外装・輸送・インテリアデザインなど)

The “non cassette” panels when processed leave sharp edges, exposed to atmospheric agents and are not esthetically pleasing. A wider spectrum of applications can be considered when the edges are covered and protected.

Alu Bender mills the panel and bends the exposed skin, covering the core and protecting it from atmospheric agents. The bending radius on the edge is perfect for all types of aluminium composite panels.

HPL
高圧ラミネート材

Processing of this material can create chatter-marks, chipping, edge opacity and sharp corners. Tying up your Machining
Centre or CNC to clean up the edges is inefficient and will inevitably create production bottlenecks.

The Alu Bender is a quick and easy solution to create a perfect edge finish and will increase production.
In one simple processing cycle, it is possible to obtain a clean finish and bevel both top and botton of the edge.

Alu Honeycomb for Ventilated Facades
通気性のあるアルミハニカム素材

The alu honeycomb core is not corrosion resistant. The exposure to atmospheric agents can cause its deterioration.
The Alu Bender by milling and bending one of the two skins improves the protection of the core from atmospheric agents and covers it up.
The bending radius on the edge is perfect for all types of aluminium composite panels.

Alu Honeycomb for Transport
輸送用アルミハニカム素材

The alu honeycomb panels are coupled with aluminium profiles to make partition walls. The crushing along the edges allows to insert panels into “H” profiles.
The Alu Bender automatically crushes the panel edge with amazing consistency and accuracy and can automatically feed panels without any length restrictions.

Fibre Cement
ファイバーセメント (建築外装とインテリア)

When cutting with a circular saw blade; a beveling process to the corners of the edge is required to avoid its fragile state.
In addition many manufacturers require that a special sealant be applied to the exposed edges to protect the panels from moisture. Currently this is done manually and is very time consuming.
The Alu Bender will bevel both top/botton of the edge and automatically applies the LUKO® sealant (or similar), in just one single processing cycle!

Aluminium Core
アルミハニカムコア(建築外装と輸送業界)

The aluminium corrugated core may not be treated as corrosion resistant. The exposure to atmospheric agents can cause its deterioration.
The Alu Bender by milling and bending one of the two skins improves the protection of the core from atmospheric agents and covers it up.
The bending radius on the edge is perfect for all types of aluminium corrugated core panels.